ISDN ANALYZER D1080 - messkom.de

More documents

Recommendations

Info

ISDN ANALYZER D1080 USER’S MANUAL REV. 5 48 Fig. 7-1 Selecting the type of Access Imp S0: this field is active only when BASIC (S) is selected in the Access field. It represents the closing impedance of the S BUS. Malfunctions over the access may occur if the S BUS is not properly terminated. The options available are: − 100 Ω, to insert the closing termination on the bus ( ) − HIGH, to remain in high impedance ( ) Fig. 7-2 Configuration in high impedance or 100 Ω Code: this field is active only when BASIC (U) is selected immediately after the Access field. It allows for selecting the line code to be used. The options available are: − 2B1Q ( ) CHAPTER 7. CONFIGURING THE INSTRUMENT
USER’S MANUAL REV. 5 ISDN ANALYZER D1080 − 4B3T ( ) Fig. 7-3 Selecting the line code CRC4: this field is active only when PRIMARY (E1) is selected immediately after the Access field. It allows for including/excluding the CRC4 verification system both in reception and transmission. The options available are: − YES, to enable the CRC4 system − NO, to disable the CRC4 system (in this case the CRC synchronism LEDs have no meaning). Fig. 7-4 Enabling the CRC4 Mode: to select the operating mode of the instrument. The options available are: CHAPTER 7. CONFIGURING THE INSTRUMENT 49
Page 1 and 2: ISDN ANALYZER D1080 USER’S MANUAL
Page 3 and 4: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 15: USER’S MANUAL REV. 5 ISDN ANAL 1.
Page 35: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 45: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 99 and 100:
USER’S MANUAL REV. 5 ISDN ANALYZE
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161:
Page 164 and 165:
ISDN ANALYZER D1080 USER’S MANUAL
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 185 and 186:
Page 187:
Page 191 and 192:
Page 193 and 194:
Page 195:
Page 199:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 215 and 216:
Page 217:
show all

ISDN ANALYZER D1080 - messkom.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?