ISDN ANALYZER D1080 - messkom.de

ISDN ANALYZER D1080 USER’S MANUAL REV. 5
56
number is made up of the area code (without the first zero)
followed by the user number. The instrument accepts
numbers with max. 20 digits.
CLIR/COLR: to enable/disable the CLIR (Calling Line
Identification Restriction – to avoid sending the identification
of the calling user to the called user) and COLR (Connect Line
Identification Restriction – to avoid sendint the identification
of the called user) supplementary services. The options
available are:
− YES: to enable the services on call base
− DEFAULT to confirm the current status of the services in
the access
− NO: to disable the services on call base.
Fig. 7-10
CLIR/COLR supplementary services
Subaddr: to set the subaddress number.
If set, the instrument checks the compatibility of incoming
calls by comparing the the subaddress contained in the
received SETUP and the subaddress set. The options
available are:
− CHANGE, sets the subaddress number ( )
CHAPTER 7. CONFIGURING THE INSTRUMENT