ISDN ANALYZER D1080 - messkom.de

ISDN ANALYZER D1080 USER’S MANUAL REV. 5
In the TELEPHONE function page (see figure above) follow this
procedure to send a call in OVERLAP mode:
press
enter the number to be called with
the keypad or select the REPEAT function ( ) to dial
the last number called.
12.1.2.1.1. How to send a call in OVERLAP mode
The digits are sent to the network by using one or more level
INFORMATION messages.
In this case the SETUP message can contain some or no digits.
Once the last number is entered, the instruments automatically
sends the call. When the connection is active the following page
appears:
114
CHAPTER 12. ISDN TERMINAL SIMULATOR