ISDN ANALYZER D1080 - messkom.de
ISDN ANALYZER D1080 - messkom.de
ISDN ANALYZER D1080 - messkom.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ISDN</strong> <strong>ANALYZER</strong> <strong>D1080</strong> USER’S MANUAL REV. 5<br />
44<br />
the CONFIGURATION page. The field is also valid for X.25<br />
calls for which the check on the NUA is activated.<br />
− NONE ACCEPTED, to reject all incoming calls.<br />
Incoming calls that are not expressly requested by the<br />
state of the current test are rejected with cause “D17”.<br />
! In the “CALL WAITING” state, the first incoming<br />
call is intercepted by the selected current<br />
measurement. Other incoming calls are either<br />
looped or rejected according to the value of the<br />
CallsRx field.<br />
Audio, to select the audio operating mo<strong>de</strong>. In the TE<br />
SIMULATOR and TE TEST configuration, the following options<br />
are available:<br />
− PUSH TO TALK, the internal microphone is only enabled<br />
upon request from the operator<br />
− HANDS FREE, internal microphone and loudspeaker are<br />
enabled<br />
− EXTERNAL HANDSET, the operator uses a standard<br />
telephone handset connected to the “VF IFC” plug for<br />
audio connection<br />
− EXTERNAL BY-PASS used for analog measurements with<br />
external instruments by means of the “VF IFC” plug<br />
In the monitor function, the acoustic monitor can<br />
either be enabled for LOUDSPEAKER and EXTERNAL<br />
HANDSET or disabled (OFF).<br />
Serial, to set the parameters of the V.28 serial port:<br />
− Rate, choosing from 600, 1200, 2400, 4800, 9600 and<br />
19200 bit/sec<br />
− No bit/character, fixed at 8<br />
− Parity, fixed at no parity<br />
− Stop bit, fixed at 1<br />
CHAPTER 6. SETTING THE INSTRUMENT