ISDN ANALYZER D1080 - messkom.de
ISDN ANALYZER D1080 - messkom.de
ISDN ANALYZER D1080 - messkom.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ISDN</strong> <strong>ANALYZER</strong> <strong>D1080</strong> USER’S MANUAL REV. 5<br />
(M) and DELIVERY bits.<br />
The received DATA packets can be transmitted again with the<br />
same contents if the RXDATA ECO function is active.<br />
In case of fixed transmission rate, the ECO cannot be enabled, in<br />
or<strong>de</strong>r not to affect the set rate.<br />
During the test the instrument displays the state of the call and<br />
some information about the DATA packets:<br />
170<br />
transmitted (Tx) and received (Rx) packets<br />
total quantity of transmitted and received data expressed in<br />
bytes<br />
net throughput both in transmission and reception calculated<br />
either from the beginning of each call or from the last reset.<br />
The throughput calculation is affected both by the load of<br />
messages over the D channel of the tested access and by the<br />
value of the RxData with the ECO function enabled. In the latter<br />
case, apart from sending its packets, the instrument must also<br />
send the received packets to echo them.<br />
The Q, M and D bits can be manually modified at any time during<br />
connection.<br />
CHAPTER 15. X.25 TERMINAL SIMULATOR