ISDN ANALYZER D1080 - messkom.de

More documents

Recommendations

Info

ISDN ANALYZER D1080 USER’S MANUAL REV. 5 56 number is made up of the area code (without the first zero) followed by the user number. The instrument accepts numbers with max. 20 digits. CLIR/COLR: to enable/disable the CLIR (Calling Line Identification Restriction – to avoid sending the identification of the calling user to the called user) and COLR (Connect Line Identification Restriction – to avoid sendint the identification of the called user) supplementary services. The options available are: − YES: to enable the services on call base − DEFAULT to confirm the current status of the services in the access − NO: to disable the services on call base. Fig. 7-10 CLIR/COLR supplementary services Subaddr: to set the subaddress number. If set, the instrument checks the compatibility of incoming calls by comparing the the subaddress contained in the received SETUP and the subaddress set. The options available are: − CHANGE, sets the subaddress number ( ) CHAPTER 7. CONFIGURING THE INSTRUMENT
USER’S MANUAL REV. 5 ISDN ANALYZER D1080 − NON DEF, sets no subadddress number ( ). Fig. 7-11 Subaddress supplementary service Following are some examples of the instrument configuration. In case a) Fig. 7-12 the instrument is configured as ISDN BASIC TERMINAL for tests over the S BUS with 100 Ω termination impedance. In case b) Fig. 7-13 the instrument is configured as ISDN BASIC TERMINAL for tests over the U interface with 2B1Q line code. In case c) Fig. 7-14 the instrument is configured to carry out tests over a PRIMARY user terminal (TE-TEST). In this mode the instrument replaces the network functions, including the NT1 functions. In case d) Fig. 7-15 the instrument is configured as MONITOR for BASIC (S) access in order to capture the level 1, 2 and 3 messages (signaling) that transit on the D channel. In case e) Fig. 7-16 the instrument is configured as TEST LEVEL 1 to carry out physical level tests over the S BUS. CHAPTER 7. CONFIGURING THE INSTRUMENT 57
Page 1 and 2:
ISDN ANALYZER D1080 USER’S MANUAL
Page 3 and 4:
USER’S MANUAL REV. 5 ISDN ANALYZE
Page 5 and 6: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 15: USER’S MANUAL REV. 5 ISDN ANAL 1.
Page 35: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 38 and 39: ISDN ANALYZER D1080 USER’S MANUAL
Page 45: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 185 and 186:
Page 187:
Page 191 and 192:
Page 193 and 194:
Page 195:
Page 199:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 215 and 216:
Page 217:
show all

ISDN ANALYZER D1080 - messkom.de

Create successful ePaper yourself

Delete template?

Save as template?