ISDN ANALYZER D1080 - messkom.de

More documents

Recommendations

Info

ISDN ANALYZER D1080 USER’S MANUAL REV. 5 166 QMDbit, the value of the Q, M and D bits associated with the transmitted packets. The functions of fields and corresponding parameters are shown in the following block diagram. The instrument can make or receive packet virtual calls over the level 2 link set for the X.25 service (SAPI=16), by specifying the TEI and the LOGICAL CALL IDENTIFIER (LCI) in the CONFIGURATION page. Figura 15-1 The instrument can send/receive set data packets to/from another instrument or its own access (autocall). The check of the X.25 service is completed by the calculation of the reception/transmission throughput and by the statistical functions on X.25 messages. CHAPTER 15. X.25 TERMINAL SIMULATOR
USER’S MANUAL REV. 5 ISDN ANALYZER D1080 The instrument can manage both outgoing and incoming calls from/to numbers of the X.25 network. For outgoing calls, the instruments sends the CALLED DTE ADDRESS, the CALLING DTE ADDRESS, which corresponds to the number entered in the Num field of the CONFIGURATION menu, the FACILITY field and the USER DATA field in the CALL REQUEST packet. 15.1. FACILITY The operator can decide to send the FACILITY field in the CALL REQUEST packet. The values of the field can either be default values or values set by the user. 15.1.1. User Select the Facilit field to enter the hexadecimal values of the octets in the FACILITY field. The maximum length is fourteen (14) bytes. ! The instrument does not check the entered octets and therefore the values must be carefully set. 15.1.2. “CUG” The CLOSED USER GROUP SELECTION is available as default FACILITY. CHAPTER 15. X.25 TERMINAL SIMULATOR 167
Page 1 and 2:
ISDN ANALYZER D1080 USER’S MANUAL
Page 3 and 4:
USER’S MANUAL REV. 5 ISDN ANALYZE
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15:
USER’S MANUAL REV. 5 ISDN ANAL 1.
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35:
Page 38 and 39:
Page 41 and 42:
Page 43 and 44:
Page 45:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 161: USER’S MANUAL REV. 5 ISDN ANALYZE
Page 164 and 165: ISDN ANALYZER D1080 USER’S MANUAL
Page 217:
show all

ISDN ANALYZER D1080 - messkom.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?