ISDN ANALYZER D1080 - messkom.de

ISDN ANALYZER D1080 USER’S MANUAL REV. 5
Confirm the entered number ( ) and press to send the
call.
When the connection is active the instrument displays the same
page as in the OVERLAP mode.
12.1.3. LOOP FUNCTION
Both for the OVERLAP and ENBLOCK mode, the LOOP function
(tasto ) can be used to loop the existing call and make new
calls up to the maximum number allowed by the access (2 for BRA
and 30 for PRA).
The Bch STATUS function
page that can be selected
from the TEST SELECTION
page shows the status of
the looped channels, as
shown in this figure.
118
Figure 12-11 Info page on B channels
The B1 channel assigned to the previously called number 071-
2189880 is now looped.
CHAPTER 12. ISDN TERMINAL SIMULATOR