ISDN ANALYZER D1080 - messkom.de

ISDN ANALYZER D1080 USER’S MANUAL REV. 5
142
analysis. The values can either be as recommended by CCITT
or set by the operator.
Duration, the duration of the test (continuous or set from 1
to 65.535 minutes)
Sequence, the pattern to be used, which can be selected
from the following pseudorandom sequences:
− 2 11 - 1 (CCITT O.152 Recom.)
− 2 15 - 1 direct (CCITT O.151 Recom.) and inverted
− user (1 octet)
Ncycles, the number of call cycles to be executed. It is only
valid for tests with non-continuous duration and for tests of
type “1 OUTGOING”.
Pause, the pause between two measuring cycles. It is only
valid if more calls cycles are set.
Print, the possibility of printing the result page in various
modes (see Paragraph 11.2.2)
During the test both the information about the state of the call
and the data about the test are displayed.
As regards the call, the following information is displayed:
the state of the call
the called/connected number and subaddress
the date and the starting time of the test
the elapsed time of the test
CHAPTER 12. ISDN TERMINAL SIMULATOR