ISDN ANALYZER D1080 - messkom.de

USER’S MANUAL REV. 5 ISDN ANALYZER D1080
Figure 12-10
Page for the CUG supplementary service
When the desired CUG service is selected, the writing next to the
Num field starts flashing.
Use the CHANGE function ( ) to enter the number to call for
the selected CUG service.
The CUG service is not enabled by default (No request mode).
To send the SENDING COMPLETE information element to the
network, enter “# ” at the end of the number.
In this case the whole number is contained in the outgoing SETUP
message.
CHAPTER 12. SDN TERMINAL SIMULATOR 117