ISDN ANALYZER D1080 - messkom.de
ISDN ANALYZER D1080 - messkom.de
ISDN ANALYZER D1080 - messkom.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USER’S MANUAL REV. 5 <strong>ISDN</strong> <strong>ANALYZER</strong> <strong>D1080</strong><br />
18. STATUS OF B CHANNELS<br />
This page can only be activated when the instrument is configured<br />
as SIMULATOR or TE TEST.<br />
This menu indicates the state of all B channels connected by the<br />
instruments.<br />
The LOOPED channels refer to incoming calls that were<br />
automatically answered by the instrument.<br />
The connected number is displayed for each incoming call.<br />
The B channel used by the instrument for the tests is i<strong>de</strong>ntified as<br />
“TEST RUN MODE”.<br />
! Over the S-BUS (B.R.A.) the instrument is not able to<br />
indicate the B channels used by other terminals<br />
connected to the bus.<br />
To disconnect a B LOOPED channel, select the corresponding line<br />
and press .<br />
18.1. RESTART<br />
This page is used to expressly request the RESTART to the<br />
network or the tested exchange. In or<strong>de</strong>r to do this, select the<br />
Restart field and indicate whether the RESTART refers to a specific<br />
B channel or to the entire interface.<br />
The instrument indicates the progress of the request.<br />
CHAPTER 18. STATUS OF B CHANNELS 185
Change language