HP OpenView Operations Administrator's Reference - filibeto.org

Tuning and Troubleshooting OVO
Solving Runtime Problems on All Managed Nodes
438
If OVO Agents are Corrupted
OVO agents are corrupted, even after running the following sequence:
opcagt -stop; opcagt -start
Problem
The ocagt -status reports that not all OVO agents are up and running,
automatic or operator-initiated actions and scheduled actions are not
executed, and applications are not started as requested. Actions are not
acknowledged, even after a successful run.
Solution for HP-UX
For HP-UX, do the following:
1. Check the status of an OVO managed node by running the following
command on that system locally:
AIX /usr/lpp/OV/OpC/opcagt -status
Windows \usr\OV\bin\OpC\opcagt -status
Tru64 UNIX, IBM/ptx, HP-UX 11.x, Linux, SGI IRIX, Solaris
/opt/OV/bin/OpC/opcagt -status
MPE/iX opcagt.bin.ovopc -status
Novell NetWare Use the OVO control agent GUI.
2. Check the local System.txt file for indications of where the problem
may be originating. For the location of this file, see “Locations of
Error Messages” on page 407.
3. If the OVO agent status is corrupt, even after the opcagt -stop;
opcagt -start sequence, perform the following procedures:
“To Clean up and Restart OVO Agents on HP-UX 11.x Managed
Nodes” on page 440
“To Clean up and Restart OVO Agents on SVR4 Managed Nodes”
on page 441
“To Clean up and Restart OVO Agents on AIX Managed Nodes”
on page 442
“To Clean up and Restart of OVO Agents on MPE/iX Managed
Nodes” on page 443
Chapter 11