HP OpenView Operations Administrator's Reference - filibeto.org

Tuning and Troubleshooting OVO
Accessing the MIB of the Managed Node
Setting the Community Name in the Configuration
File for the SNMP Daemon
You can set the get-community-name by editing the configuration file for
the SNMP daemon.
On HP-UX 11.x managed nodes, this file is located under:
/etc/SnmpAgent.d/snmpd.conf
For get-community-name, enter the community name for the SNMP
agent.
You can specify no community name, one community name, or more than
one community name:
❏ No Community Name
If you do not enter a name, the SNMP agent responds to get requests
using any community name.
❏ One or More Community Names
If you enter a community name, the SNMP agent responds to get
requests only using this community name. Add a line for each
community name.
Examples:
get-community-name: secret
get-community-name: public
Chapter 11 465