Membrane and Desalination Technologies - TCE Moodle Website

Membrane Technologies for Oil–Water Separation 667
78. Uragami T, Fujimoto M, Sugihara M (1980) Studies on syntheses and permeabilities of special
polymer membranes. 28. Permeation characteristics and structure of interpolymer membranes
from poly (vinylidene fluoride) and poly (styrene sulfonic acid). Desalination 34:311–323
79. Blicke C, Peinemann KV, Nunes SP (1993) Ultrafiltration membranes from poty(ether sulfonamide)/poly(ether
imide) blends. J Memb Sci 79:83–91
80. Zeman LJ (1983) Adsorption effects in rejection of macromolecules by ultrafiltration membranes.
J Memb Sci 15:214–230
81. Hanemaaijer JH, Robbertsen T, van den Boomgaard Th, Gunnik JW (1989) Fouling of ultrafiltration
membranes. The role of protein adsorption and salt precipitation. J Memb Sci 40:199–217
82. Sivik B, Wahlgren M, Miezis Y (1990) A rheological screening method for membrane modifying
polymers. Desalination 77:181–193
83. Kim KJ, Fane AG, Fell CJD (1988) The performance of ultrafiltration membranes pretreated by
polymers. Desalination 70:229–249
84. Brink LES, Romijn DJ (1990) Reducing the protein fouling of polysulfone surfaces and polysulfone
ultrafiltration membranes; Optimization of the type of presorbed layer. Desalination
78:209–233
85. Brink LES, Elbers SJG, Robbertson T, Both P (1993) The anti-fouling action of polymers
preadsorbed on ultrafiltration and microfiltration membranes. J Memb Sci 76:281–291
86. Cho DL, Ekengren O (1993) Composite membrane formed by plasma-polymerized acrylic acid
for ultrafiltration of bleach effluent. J Appl Polym Sci 47:2125–2133
87. Mok S, Worsfold DJ, Fouda A, Matsuura T (1994) Surface modification of polyethersulfone
hollow-fibre membranes by g-ray irradiation. J Appl Polym Sci 51:193–199
88. Ulbricht M, Belfort G (1996) Surface modification of ultrafiltration membranes by low temperature
plasma, II. Graft polymerization onto polyacrylonitfile and polysulfone. J Memb Sci
111:193–215
89. Higuchi A, Iwata N, Nakagawa T (1988) Surface-modified polysulfone hollow fibers. J Appl
Polym Sci 36:1753–1767
90. Breithach L, Henke E, Staude E (1991) Heterogeneous functionalizing of polysulfone membranes.
Angew Makromol Chem 184:183–196
91. Guiver MD, Black E, Tam CM, Deslandes Y (1993) Functionalized polysulfone membranes by
heterogeneous lithiation. J Appl Polym Sci 48:1597–1606
92. Hamza A, Pham VA, Matsuura T, Santerre JR (1997) Development of membranes with low
surface energy to reduce the fouling in ultrafiltration applications. J Memb Sci 131:217–227
93. Xu ZL, Chung TS, Huang Y (1999) Effect of polyvinyl pyrrolidone molecular weights on
morphology, oil/water separation, mechanical and thermal properties of polyetherimide/polyvinyl
pyrrolidone hollow fiber membranes. J Appl Polym Sci 74:2220–2233
94. Marchese J, Ponce M, Ochoa NA, Prádanos P, Palacio L, Hernández A (2003) Fouling behaviour
of polyethersulfone UF membranes made with different PVP. J Membr Sci 211:1–11
95. Xu ZL, Sichuan T, Loha KC, Lima BC (1999) Polymeric asymmetric membranes made from
polyetherimide/polybenzimidazole/poly(ethylene glycol) (PEI/PBI/ PEG) for oil–surfactant–
water separation. J Memb Sci 158:41–53
96. Ochoa NA, Masuelli M, Marchese J (2003) Effect of hydrophilicity on fouling of an emulsified
oil wastewater with PVDF/PMMA membranes. J Memb Sci 226:203–211
97. Shen LQ, Xu ZK, Liu ZM, Xu YY (2003) Ultrafiltration hollow fiber membranes of sulfonated
polyetherimide/polyetherimide blends: preparation, morphologies and anti-fouling properties.
J Memb Sci 218:279–293