IT Baseline Protection Manual - The Information Warfare Site

Safeguard Catalogue - Organisation Remarks
____________________________________________________________________ .........................................
SERVER TIME
TYPE
Hamburg-S1 Reference Main
partition
Hamburg-S2 Secondary Read/write
replication
____________________________________________________________________ .........................................
IT-Baseline Protection Manual: Oktober 2000
PARTITIO
NS
[Root] Public Hamburg Berlin
Main
partition
Read/write
replication
Hamburg-S3 Secondary Main
partition
Berlin-S1
Berlin-S2
Primary
Primary
Read/write
replication
Read/write
replication
Main
partition
Read /
write
replication
Hardware configuration
It should be noticed here that, during a new installation of a Netware server
(e.g. following a system crash), all details concerning the hardware settings
must be known in order to allow quick and proper re-configuration of the
server. If these settings are not known, they need to be scanned using
appropriate programs or read off on the device, which proves quite timeconsuming.
This applies especially to the rectification of time-critical errors.
As concerns each of the hardware components used on the server, such as
network adapter cards, graphic cards, communications interfaces (serial,
parallel, USB, PS/2) as well as SCSI, IDE and RAID controller, the following
information must be recorded, among others:
- Interrupt
- I/O interface
- DMA channel
- SCSI and LUN address
- Memory address
- Node address
- Slot number
- External IPX network number
- Frame type
The documentation of the server hardware must also cover external devices
such as
- Printers and