Oracle Database Oracle Clusterware Installation Guide for HP-UX
Oracle Database Oracle Clusterware Installation Guide for HP-UX
Oracle Database Oracle Clusterware Installation Guide for HP-UX
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuring Storage <strong>for</strong> <strong>Oracle</strong> <strong>Clusterware</strong> Files on Raw Devices<br />
# /usr/sbin/insf -e<br />
5. For each disk that you want to use, enter the following command on any node to<br />
verify that it is not already part of an LVM volume group:<br />
# /sbin/pvdisplay /dev/dsk/cxtydz<br />
4-10 <strong>Oracle</strong> <strong>Clusterware</strong> <strong>Installation</strong> <strong>Guide</strong><br />
If this command displays volume group in<strong>for</strong>mation, then the disk is already part<br />
of a volume group. The disks that you choose must not be part of an LVM volume<br />
group.<br />
Note: If you are using different volume management software, <strong>for</strong><br />
example VERITAS Volume Manager, then refer to the appropriate<br />
documentation <strong>for</strong> in<strong>for</strong>mation about verifying that a disk is not in<br />
use.<br />
6. If the ioscan command shows different device names <strong>for</strong> the same device on any<br />
node, then:<br />
a. Change directory to the /dev/rdsk directory.<br />
b. Enter the following command to list the raw disk device names and their<br />
associated major and minor numbers:<br />
# ls -la<br />
The output from this command is similar to the following <strong>for</strong> each disk device:<br />
crw-r--r-- 1 bin sys 188 0x032000 Nov 4 2003 c3t2d0<br />
In this example, 188 is the device major number and 0x32000 is the device<br />
minor number.<br />
c. Enter the following command to create a new device file <strong>for</strong> the disk that you<br />
want to use, specifying the same major and minor number as the existing<br />
device file:<br />
Note: <strong>Oracle</strong> recommends that you use the alternative device file<br />
names shown in the previous table.<br />
# mknod ora_ocr_raw_256m c 188 0x032000<br />
d. Repeat these steps on each node, specifying the correct major and minor<br />
numbers <strong>for</strong> the new device files on each node.<br />
7. Enter commands similar to the following on every node to change the owner,<br />
group, and permissions on the character raw device file <strong>for</strong> each disk device that<br />
you want to use:<br />
Note: If you are using a multi-pathing disk driver with Automatic<br />
Storage Management, then ensure that you set the permissions only<br />
on the correct logical device name <strong>for</strong> the disk.<br />
If you created an alternative device file <strong>for</strong> the device, then set the<br />
permissions on that device file.