JOINT FLEET MAINTENANCE MANUAL

APPENDIX AD
GENERIC BASE LINE OF FLEET INTRODUCTION TEAM
FUNCTIONS AND RESPONSIBILITIES
COMFLTFORCOMINST 4790.3 REV A CH-1
1. Perform all tasks normally assigned to the PCO until the PCO has reported to the Construction Site and
assumed duties.
2. Provide assistance to the PCO in carrying out duties according to Navy Regulations.
3. Provide continuity in the management and administration of pre-commissioning facilities at the Construction
Site.
4. Coordinate the overall pre-commissioning crew training program for both nucleus and balance crews.
5. Schedule and conduct crew training at the Construction Site. Such training shall be structured to support the
Force Commander's standard for Crew Certification. Additional training provided will consist of:
a. Basic Damage Control Training (100, 200 and 300 series).
b. Ship Familiarization Training.
c. Enlisted Surface/Aviation Warfare Specialist Qualification/Requalification Training.
6. Provide each ship with standardized tailored Lesson Training Guides (where appropriate) in the areas of:
a. Engineering.
b. Mess Specialist.
c. Supply.
d. Communications.
e. Operations.
f. Weapons.
g. Deck.
h. Air.
7. Provide each PCO with standardized administrative, organizational and procedural manuals, bills and
directives for the ship class.
8. Monitor the progress of construction, outfitting, test and trials of each ship.
9. Perform the specific functions as assigned by the Force Commander or higher authority.
10. Provide familiarization training if directed.
I-2AD-1