TrainController Gold and Silver - Freiwald Software

!
Note, that a license of TrainProgrammer is required to write values into the
CVs of a decoder with TrainController.
Even though this procedure has been described here at the end of this section for
reasons of the contents, the trimming of the maximum decoder speed step and other
speed related decoder CVs must be performed, before the measurement of the
speed profile is performed.
Using a Roller Test Bench
TrainController Gold additionally provides the possibility to perform all measurements
on a roller test bench. This can normally considerably reduce the time needed for
the measurements. For this purpose a roller test bench is required, which can be connected
to a computer. This enables the computer to determine the speed of the locomotive
on the roller test bench
.
The following roller test benches are suited:
• Roller test benches from Zeller with connection to the computer via Speed-Cat
The following methods for measurement are available:
Automatic measurement of one single speed step.
Automatic measurement of the complete speed profile.
3.6 Headlights, Steam and Whistle
For each engine an arbitrary number of engine function controls (e.g. light, sound,
smoke, etc.) can be defined. Each function can perform one of the following:
• activating a built-in function of an engine decoder
• playing a sound file
• executing a list of operations
Engine Functions can be executed
• manually by using the auxiliary function controls of the train window
121