TrainController Gold and Silver - Freiwald Software

228
Diagram 137: Arranging a Train Set
The options of this dialog allow to add engines or cars to a train set, to remove vehicles,
to change the direction of a vehicle within the train set or to split train sets into two other
train sets.
To operate the speed or direction of a train set select an arbitrary engine currently contained
in this train set in the Train Window. Changing the speed or direction of this vehicle
will also be applied accordingly to all other engines contained in the train set. The
speed and direction controls of the Train Window always reflect the status of the selected
individual vehicle rather than the complete train set. If there are several engines
with different speed characteristics assigned to a train set (multiple unit), i.e. the engines
run with different speed at the same speed step, then TrainController Gold is
able to balance out the different behavior of the engines. This requires correct adjustment
of the speed profile of each affected engine, however (see section 3.5, “The Speed
Profile”).
Multiple unit operation via train sets is also possible with the throttle of your digital
system. To operate the speed or direction of a train set select an arbitrary engine currently
contained in this train set on the throttle of your digital system. Changing the
speed or direction of this vehicle with the digital throttle will also be applied accordingly
by TrainController Gold to all other engines contained in the train set.