TrainController Gold and Silver - Freiwald Software

If this has been done correctly, the blocks in the switchboard will change their color according
to the movements of your train on the layout. Play around a little bit with your
train and watch how the blocks in the switchboard are indicated.
Displaying train positions on the Computer Screen
Now we are ready for train tracking, i.e. displaying of train positions on the computer
screen.
To do this move your real train into “Block 1”, if it is not located there already. Ensure,
that the train is heading towards the other blocks, i.e. that it has to run forward, in order
to go to “Block 2” or “Block 3”, respectively.
Then turn off Edit Mode in the View menu (see Diagram 4). Next select “Block 1” in
the switchboard and call the Assign Train command of the Block menu according the
following image:
Diagram 26: Block Menu
In the following dialog select the “Passenger Train” and select the train orientation by
marking the option near the arrow pointing to the right.
45