TrainController Gold and Silver - Freiwald Software

Now click on the symbol of the left turnout in the track diagram and select the Properties
of the Edit menu. Do you remember? This command is used for all objects contained
in the software (trains, turnouts, signals, routes, etc.), whenever it is required to
change the settings of the particular object. The following window is now displayed:
36
Diagram 16: Specifying the Digital Address
Specify the same address, that you have been using previously to control the corresponding
real turnout with your digital system, in the field labeled Address. Now click
on the symbol of the turnout, that is located to the right of the label Test. The real turnout
on your model railroad layout should now respond. Depending on the wiring of
your turnout it is possible, that the image in the software and the physical turnout do not
show the same status (closed vs. thrown). If this is the case click on the grey circle in
the upper row of the Output Configuration to adjust the displayed status (see Diagram
16). The highlighting in the Output Configuration should now change and the dis-