TrainController Gold and Silver - Freiwald Software

track instead. To be on the safe side you should ask the dealer or manufacturer of the
engine decoder, if it can be used as stationary block decoder without the risk to be damaged.
The supplier of the program will not be liable to you for any damages.
TrainController supports also digital systems, which provide computer controlled
throttles dedicated to be used as stationary block decoders (e.g. the systems RCI or
CTI).
The operation of conventional locomotives with stationary block decoders is based on
the blocks of the Dispatcher (see chapter 5, “The Visual Dispatcher”). As a consequence
engines or trains can only be operated with stationary block decoders, if they are
running under control of the Dispatcher. In return the Dispatcher guarantees, that traveling
engines and trains are operated by the appropriate stationary block decoders. Because
the Dispatcher is able to reserve blocks automatically according to the progress
of traveling engines and trains under its control, it can also assign the appropriate stationary
block decoders automatically to the engines.
326
Additional Options
In order to operate stationary block decoders, select the Option Stationary Block Decoder
in the Setup Digital Systems dialog box (see Diagram 188).
Diagram 188: Arranging the Digital Systems to use Stationary Block Decoders