TrainController Gold and Silver - Freiwald Software

!
• Fleischmann Twin Center
• Fleischmann Profi-Boss
• Littfinski HSI-88
• Zimo
• Doehler & Haas / MTTM Future Central Control
• and others
For the complete list refer to the Help menu of TrainController.
You can run different systems simultaneously on different serial or USB ports. This increases
the maximum number of trains, turnouts, signals and feedback indicators that
can be operated. If your favorite digital system is not able to report the state of feedback
sensors, then you are able to enlarge this system with a second system that is able to do
this.
TrainController also supports an offline mode that allows trial operation without a
connection to a real model railroad. Up to twelve digital and control systems can be
connected simultaneously.
For each digital system additional information is provided that further explains the use
of the particular system with TrainController. This information can be found by
opening the help menu of TrainController and entering the name of the digital system
or the name of the manufacturer as search key.
Modes of Train Operation
With TrainController it is possible to run digitally equipped engines as well as conventional
engines that don’t have digital decoders. The operation of conventional engines
is done with stationary block decoders; i.e. decoders or computer controlled throttles
that are mounted at fixed positions on your model railroad rather than in each engine.
This feature is useful if:
• you have a large collection of engines and not all are digitally upgraded.
• you have a conventional - i.e. non-digital - operated model railroad and want to control
your layout with your computer without installing a digital decoder in each engine
first.
• the models of your engines are very small and the decoders do not fit into the engines
(e.g. when you run Z scale).
67