TrainController Gold and Silver - Freiwald Software

section 3.5, “The Speed Profile”). As far as this tutorial is concerned we are satisfied, if
we can get the train to slow down and to stop smoothly somewhere within a block.
Now add a red and a yellow triangle, which point to the left, to “Block 4” in the same
way described above and specify similar settings for Distance and Ramp.
Finally do the same for all other blocks “Block 1, “Block 2” and “Block 3”.
Creating a Commuter Train
In the next step we want a train located in “Block 1” of our small sample layout to run
back and forth between “Block 1” and “Block 4”. To do this run your train manually
back to “Block 1”. Train tracking should ensure, that the display reflects this movement
and finally looks like Diagram 28. Ensure that Edit Mode in the View menu is turned
off (see Diagram 4).
Now select “Block 1”, i.e. the block, where the train image is located, and call the
Rules command of the Train menu.
Diagram 37: Rules Command
Then check the option Reverse automatically:
55