TrainController Gold and Silver - Freiwald Software

Diagram 13: Track section with turnout
The first turnout in the switchboard has now been created. Now click on the cell, where
the diverging route of this turnout ends and drag the mouse to the right to a cell, that is
located about one third left of the right end of the straight track section.
Diagram 14: Extending the track diagram
Finally click on the cell, where the last mouse movement ended, and drag the mouse
one cell to the right and one cell down.
Diagram 15: The complete track diagram
The track diagram of our small sample layout is now complete and should look like Diagram
15.
If you want to operate real turnouts of your existing model railroad with the track diagram
control panel just created, try to identify a small area of your layout, that contains
a similar track structure with two turnouts as shown above. Now operate these turnouts
with your digital system. This step is recommended to verify, that the digital system and
the turnouts are correctly working and to bring the digital addresses of the turnouts back
to your mind. This is needed in the next step.
Preparing a Turnout for Model Railroad Computer Control
Ensure, that the Edit Mode option in the View menu is still active (see Diagram 4).
35