TrainController Gold and Silver - Freiwald Software

In order to work properly the turntable symbol in the switchboard must be synchronised
with the track layout of the physical turntable.
Diagram 181 illustrates, how this is done:
310
Diagram 181: Synchronizing the Turntable Symbol
The left image in Diagram 181 represents the track layout of the physical turntable. It
has 6 active and 4 passive tracks, 10 significant track positions in total. The right image
shows the schematic track layout of the turntable symbol in the switchboard. The number
of active tracks must be identical in both images. Passive track exits of the physical
turntable, that can be addressed with the bridge or the turntable decoder, respectively,
but do not have a track connection to the rest of the layout, are not displayed and not
taken into account by the schematic turntable symbol displayed in the switchboard. This
is done to reduce the switchboard space required to display the turntable symbol.
To perform the synchronisation ensure first, that the number of active tracks in both
windows is identical. Then select a track in the left image and a track in the right symbol,
that will be mapped to each other. Then press Assign. The subsequent procedure