Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User Parameters<br />
By means of the MOD function "User Parameters" several machine parameters<br />
can be accessed easily (e.g. adaptation of the data interface). This user<br />
parameters accessible via MOD function are defined by the machine tool<br />
manufacturer through machine parameters.<br />
Entry Values<br />
Possible entry values are:<br />
• The numbers 0 and 1 to select functions, signs, counting directions etc.<br />
• Numerical values for feed rates, displacements etc.<br />
• Decimal values that can be calculated by combining several functions<br />
(bit-coded).<br />
• Bit patterns (marked by %), as of <strong>TNC</strong><strong>407</strong> with NC software 243 03* -e.g.<br />
MP 10: %00111<br />
i.e. X, Y, Z with encoder (1)<br />
IV, V without encoder (0)<br />
• Hexadecimal values (marked by $), as of <strong>TNC</strong><strong>407</strong> with NC software 234 03* -e.g.<br />
MP 7353.0: $ 0F818A0<br />
Structure<br />
The machine parameters are subdivided into groups.<br />
The machine parameter number are structured such that the list can be expanded<br />
easily.<br />
0-999 Encoders and machine axes: allocation, evaluation, compensation<br />
1000 Positioning<br />
1400 Operation with feed forward control<br />
1700 Operation with servo lag<br />
3000 Spindle<br />
4000 Integral PLC<br />
5000 Adaptation of the data interface<br />
6000 3D-touch probe (general parameters)<br />
6210 Digitizing with 3D-touch probe<br />
6500 Tool calibration with TT 110<br />
7100 Tapping<br />
7200 Display and Programming<br />
7320 Colors, general display and FK graphics<br />
7330 USER parameters<br />
7350 Colors, general display and FK graphics<br />
7400 Machining and program run<br />
7600 Hardware<br />
RH<br />
1.0 <strong>TNC</strong> <strong>407</strong>/<strong>415</strong> Machine Parameters Overview 16.01.95 10.1 2