Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...

Function MP A B C D E F Input AE-6
No. Bit Entry Value
Graphic simulation of a process without
TOOL CALL and without infeed movement in the
operating modes "Program Run" and "Test Run"
Tool radius 7315* - - - - Š Š 0 to 99 999 [mm] 0
Tool penetration depth
(from upper edge of blank)
7316* - - - - Š Š 0 to 99 999 [mm] 0
M-function to start the simulation 7317.0* - - - - Š Š 0 to 88 0
M-function to interrupt the simulation 7317.1* - - - - Š Š 0 to 88 0
* accessible via code number 123
RH
1.0 TNC 407/415 Machine Parameters MP 7315 - MP 7317.1 08.05.95 10.2 46