Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tool Calibration with TT 110<br />
Function MP A B C D E F Input AE-6<br />
No. Bit Entry Value<br />
Tool calibration cycles 6500 - - - - - Š 0 = cycles inhibited<br />
1 = cycles enabled<br />
0<br />
Probing direction for tool<br />
0 = pos. probing direction in the angular<br />
0<br />
calibration 6505 - - - - - Š reference axis (0° axis)<br />
1 = pos. probing direction in the +90° axis<br />
2 = neg. probing direction in the angular<br />
reference axis (0° axis)<br />
3 = neg. probing direction in the +90° axis<br />
0 = calculation of probing feed with constant 0<br />
Calculation of probing feed rate 6507 - - - - - Š tolerance<br />
1 = calculation of probing feed with variable<br />
tolerance<br />
2 = constant probing feed<br />
Maximum permissible measuring<br />
error when calibrating with a rotating<br />
tool<br />
Probing feed rate<br />
6510 - - - - - Š 0.002 to 0.999 [mm] 0.005<br />
when calibrating with a non-rotating tool<br />
Distance between lower edge of<br />
6520 - - - - - Š 10 to 3 000 [mm/min] 10<br />
tool and upper edge of stylus<br />
for tool radius calibration<br />
Diameter or edge length of the<br />
6530 - - - - - Š 0.001 to 99.9999 [mm] 10<br />
TT 110 stylus 6531 - - - - - Š 0.001 to 99 999.9999 [mm] 10<br />
RH<br />
1.0 <strong>TNC</strong> <strong>407</strong>/<strong>415</strong> Machine Parameters MP 6500 - MP 6531 16.01.95 10.2 36
Change language