Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
Service Manual TNC 407 / TNC 415 - heidenhain - DR. JOHANNES ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Function MP A B C D E F Input AE-6<br />
No. Bit Entry Value<br />
Safety zone around the stylus<br />
of TT 110 for prepositioning<br />
Rapid traverse in the probing<br />
6540 - - - - - Š 0.001 to 99 999.9999 [mm] 10<br />
cycle<br />
M-function for oriented spindle<br />
6550 - - - - - Š 10 to 10 000 [m/min] 10<br />
stop for measuring individual cutting<br />
6560 - - - - - Š -1 = oriented spindle stop via NC<br />
10<br />
edges<br />
0 = function inactive<br />
1 to 88 = number of M-function for oriented<br />
spindle stop via PLC<br />
Maximum permissible surface<br />
cutting speed at the cutting edges of<br />
the tool<br />
Center coordinates of the<br />
6570 - - - - - Š 1.0000 to 120.0000 [m/min] 100<br />
TT 110 stylus<br />
- 99 999.9999 to + 99 999.9999 [mm]<br />
referenced to the machine datum X 6580.0<br />
- - - - - Š<br />
0<br />
Y<br />
Z<br />
6580.1<br />
6580.2<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
Š<br />
Š<br />
0<br />
0<br />
RH<br />
1.0 <strong>TNC</strong> <strong>407</strong>/<strong>415</strong> Machine Parameters MP 6540 - MP 6580.2 08.05.95 10.2 37
Change language