ModuleWare Reference Guide - Hornad

Sequential PartsSerial to Parallel Shifter (shiftsp)ParametersTable 8-38. Serial to Parallel Shifter ParametersParameter Values Defaultdout Port width (must be > 0) Automaticclk_en_typeclk_typerst_typerl_typerst_valActiveHigh,ActiveLowRising,Falling,RisingLast,FallingLast,RisingEdge,FallingEdgeSyncActiveHigh,AsyncActiveHigh,SyncActiveLow,AsyncActiveLowActiveHigh,ActiveLowInternal register reset valueActiveHighRisingAsyncActiveHighActiveHigh0Design Rule Checks• An error is issued if the width of any port cannot be determined or if ports clk, clk_en, rst,din and rl do not have a fixed width of 1.• A warning is issued and HDL generation fails for this part if any of ports dout, clk, rl or rstare not connected.ModuleWare Reference Manual, Library Version 1.9 201September 18, 2008