ModuleWare Reference Guide - Hornad

ConstantsPower (vdd)Power (vdd)This part is a 1 value driver. All ones are placed on output port dout.This part is equivalent to n 1-bit Vdd, where n is the port width.FunctionFor every bit:dout = 1ParametersTable 3-3. Power ParametersParameter Values Defaultdout Port width (must be > 0) AutomaticDesign Rule Checks• An error is issued if any of the width of the dout port cannot be determined.• A warning is issued and HDL generation fails for this part if the dout port is not connected.62ModuleWare Reference Manual, Library Version 1.9September 18, 2008