ModuleWare Reference Guide - Hornad

Combinatorial PartsW-Bit Multiplexer (mux1)ParametersTable 4-21. W-Bit Multiplexer ParametersParameter Values Defaultdin, sel Port width (must be > 0) Automaticselerror_type ActiveHigh, ActiveLow, None ActiveHighDesign Rule Checks• An error is issued if the width of any port cannot be determined or ports dout and selerrordo not have a fixed width of 1.• A warning is issued and HDL generation fails for this part if ports sel or din are notconnected or if both of ports dout and selerror are not connected.ModuleWare Reference Manual, Library Version 1.9 79September 18, 2008