ModuleWare Reference Guide - Hornad

Combinatorial PartsDecoder, Combined Output (decoder1)ParametersTable 4-5. Decoder Truth Table — Combined Output (cont.)dindout101 00100000110 01000000111 10000000Table 4-6. Decoder Parameters — Combined OutputParameter Values Defaultdin, dout Port width (must be > 0) Automaticselerror_type ActiveHigh, ActiveLow, None ActiveHighDesign Rule Checks• An error is issued if the width of any port cannot be determined or port selerror does nothave a fixed width of 1.• A warning is issued and HDL generation fails for this part if both of ports din or dout arenot connected.68ModuleWare Reference Manual, Library Version 1.9September 18, 2008