ModuleWare Reference Guide - Hornad

Combinatorial PartsN-Input Multiplexer (mux)ParametersTable 4-12. N-Input Multiplexer ParametersParameter Values Defaultdin0 to dinN, doutselPort widths (must be > 0)Port widths (must be > 0)AutomaticAutomaticDesign Rule Checks• An error is issued if the width of any port cannot be determined, port sel does not have afixed width of log2(width of din) while the number of din ports must be a power of 2 or ifthe input and output ports do not have the same width.• A warning is issued and HDL generation fails for this part if ports sel or dout are notconnected.ModuleWare Reference Manual, Library Version 1.9 73September 18, 2008