ModuleWare Reference Guide - Hornad

Combinatorial PartsDecoder, Separate Outputs (decoder)ParametersTable 4-4. Decoder Parameters — Separate OutputsParameter Values Defaultdin Port width (must be > 0) AutomaticDesign Rule Checks• An error is issued if the width of any port cannot be determined or port din does not havelog2(N) bits (For example: 1, 2 or 3 bits correspond to 2, 4 or 8 output ports).• A warning is issued and HDL generation fails for this part if port din and at least one of theoutput ports are not connected.66ModuleWare Reference Manual, Library Version 1.9September 18, 2008