ModuleWare Reference Guide - Hornad

Stimulus PartsCounter Value (counter)Counter Value (counter)This part provides a counter based waveform generator.You can specify a label for the generated VHDL process (orVerilog always block). If not specified, a unique label isgenerated from the part name (for example, counter1,counter2..counterN).The width of the count output signal is set to bydefault but you can optionally set 2, 4, 8, 16, 32 or 64 bits bychoosing from a dropdown list.The clock type can be Rising, Falling or None. If you are using VHDL, you can also chooseRisingLast, FallingLast, RisingEdge or FallingEdge transitions. If you choose None, the cycletime value must be specified.ModuleWare Reference Manual, Library Version 1.9 273September 18, 2008