ModuleWare Reference Guide - Hornad

Stimulus PartsCounter Value (counter)ParametersTable 11-6. Counter Value ParametersParameter Values DefaultLabelWidthClock Type 1Counter TypeDirectionEntry RadixCount FromIncrement ByCount ToDecoded ValuesCycle TimeTiming OffsetRepeatRun ForeverA unique HDL identifiercount port width (must be > 0)Rising,Falling,RisingLast,FallingLast,RisingEdge,FallingEdge,NoneRange,Binary,Gray,OneHot,ZeroHot,JohnsonUp,Down,UpThenDown,DownThenUpDecimal,Binary,Octal,HexInteger value for Range counterInteger value for Range, Binary and Gray countersInteger value for Range counterComma separated list of Integer valuesReal number (optionally in ms, us, ns or ps)Real number (optionally in ms, us, ns or ps)Integer number of times to repeatOn or OffcounterRisingRangeUpDecimal02242,12,16100ns0ns5Off1. RisingLast, FallingLast, RisingEdge and FallingEdge clock types are only available in VHDL.Checks• An entry error is issued if invalid time units are specified.• A design rule checking error is issued if a parameter is outside its permitted range.• A warning is issued if no vectors would result from the specified parameters or if a veryhigh number (> 10,000) would result.ModuleWare Reference Manual, Library Version 1.9 275September 18, 2008