num parameter manual - Documentation CN

10.6 UNI-TELWAY Master Settings P110
Description
10 - 12 en-938818/8
Category Communication
Type 0 8-bit hexadecimal
No. of words 8
Sets the UNI-TELWAY master function:
- line assigned to UNI-TELWAY,
- communication parameters,
- notation type (Intel or Motorola),
- timeouts (turnaround, envelope delay, intercharacter gap),
- number of slaves,
- the number of slave to which the unsolicited data are sent,
- the number of polling cycles.
Principle
Word N0
Sets the line number assigned to UNI-TELWAY. The default value is $FF.
For a NUM 1060 CNC, the possible values are:
- $0 for the machine processor TTL line or COMM1 on the UC SII CPU,
- $1 for the machine processor RS232C or COMM2 on the US SII CPU,
- $4 to $B for the lines of the IT/serial line cards.
For a NUM 1020/1040 CNC, the value is $01 for the serial line.
8
9
A
B
IT/serial
line cards
4
5
6
7
0
1
NUM 1060 SERIES II NUM 1060
Machine
processor
0
1
UC SII
CPU
8
9
A
B
IT/serial
line cards
4
5
2
6
3
7
0
1
CNC
processor
Machine
processor
NUM 1020/1040
1 0