num parameter manual - Documentation CN

4.4 Displayed Axes P0
Description
4 - 10 en-938818/7
Category Axis declaration
Type 6 32-bit hexadecimal
No. of words 1
Defines the axes displayed on the INFO and AXIS pages.
Principle
The bit position gives the physical axis address.
The bit is a 1 to declare the axis as displayable if it is assigned to a group, i.e. declared in P9.
REMARK: If the axis is declared in P2 or P3, it is displayed on the INFO and AXIS pages. If it
is not declared in P2 or P3, it is only displayed on the INFO page.
Example
The axes at addresses 0 to 6 are displayable.
Axis @ 31
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
Bit 31
Bit 24 Bit 23
Word N0 0000007F
Bit 16 Bit 15
$0000007F
Bit 8
Bit 7
Axis @ 0
Bit 0