num parameter manual - Documentation CN

Table of Contents
8.5 Spindle Measurement Conversion 8 - 12
8.6 Spindle Reference Reversal 8 - 14
8.7 Spindle 1 Speed Ranges 8 - 16
8.8 Spindle 2 Speed Ranges 8 - 18
8.9 Spindle 3 Speed Ranges 8 - 20
8.10 Spindle 4 Speed Ranges 8 - 22
8.11 Spindle Origins 8 - 24
8.12 Maximum Speed During Spindle Indexing 8 - 26
8.13 Spindle Indexing In-Position Window 8 - 28
8.14 Spindle Indexing Servo-Loop Gain 8 - 30
8.15 Spindle Acceleration and Minimum
Spindle Reference in Hole Bottom 8 - 32
8.16 Cycle Axis Integration Time Constant,
Cycle Axis Position Anticipation Time
Constant and Spindle Zero Crossing
Anticipation Time Constant 8 - 34
9 Miscellaneous Functions 9 - 1
9.1 Data Tables 9 - 3
9.2 Miscellaneous Function Parameter Setting 9 - 6
9.3 Subroutine Call by M Function 9 - 8
9.4 Sampling Period 9 - 10
9.5 Minimum Block Execution Time 9 - 12
9.6 Interaxis Calibration Table and
Programme Stack Reservation 9 - 14
9.7 Graphic Element Configuration 9 - 16
9.8 Xoff Character Setting 9 - 18
9.9 Memory Area Allocation 9 - 20
9.10 Display Language and Machine Type
Selection 9 - 22
9.11 Built-in PLC Programming Language
Selection 9 - 24
9.12 Maximum Time Allocated to the PLC
Application 9 - 26
9.13 Backup in Path, Auto Recall after INTERV 9 - 28
10 Communication 10 - 1
10.1 Character Formatting for DNC1 10 - 2
10.2 Translation of Special Characters for DNC1 10 - 4
10.3 DNC1 Timeouts 10 - 6
10.4 Setting the File Up/Download Timeout 10 - 8
10.5 MAPWAY/ETHWAY Network and
Station Number 10 - 10
10.6 UNI-TELWAY Master Settings 10 - 12
10.7 UNI-TELWAY Slave Settings 10 - 16
10.8 Settings of the Line Assigned to the
PLCTOOL Link 10 - 20
en-938818/8 5