Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Programming with the programming software
0
RS-422
Select the [RS-422C] port and click the right mouse button. The following dialog opens.
Assign the following parameters to the port:
Baud rate
Parity
Data bits
Stop bits
10436AEN
RS-485
For DOP11A-30 only:
Select the [RS-485] port and click the right mouse button. The following dialog opens.
Assign the following parameters to the port:
Baud rate
Parity
Data bits
Stop bits
10437AEN
For communication with MOVIDRIVE ® , set 9600, even, 8 data bits, 1 stop bit.
112 System Manual – DOP11A Operator Terminals