Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Programming with the programming software
0
Make same size
The [Make same size] option offers three functions to make selected objects the same
size.
Width Matches the width of the selected objects to that of the reference object.
Height Matches the height of the selected objects to that of the reference object.
Both Matches the size of the selected objects to that of the reference object.
Space evenly
The [Space evenly] option offers two functions to change the distance between two
selected objects.
Vertical Matches the position of the selected objects to have an identical vertical distance.
The objects closest to the top and bottom are not moved. At least three objects
must have been selected.
Horizontal Matches the position of the selected objects to have an identical horizontal
distance. The objects closest to the left and right side are not moved. At least three
objects must have been selected.
Tile
The [Tile] option offers two functions that enable you to position two objects next to each
other
Vertical Changes the vertical position of the selected objects so they are adjacent to the reference
object.
Horizontal Changes the horizontal position of the selected objects so they are adjacent to the
reference object.
86 System Manual – DOP11A Operator Terminals