Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Graphic display and control
0
[Access] tab
For DOP11A-50 only.
Parameters Description
Current diagram signal The register value determines which curve is to be processed in run
mode.
Current cursor signal The register value determines which point on the curve will be processed
in run mode.
X processing step Specifies the interval between the steps at which you press the arrow
keys in run mode.
Y processing step Specifies the interval between the steps at which you press the arrow
keys in run mode.
Activate user input Specify which curve will be maneuverable in run mode.
curves 1-2
[Dynamics] tab
The functions on this tab are explained in section "General parameters" on page 114.
VU-meter Object used for creating a graphic VU-meter on the screen.
[General] tab
10640AEN
Parameter Description
Analog signal Signal address
Scale division Indicats the type of scale division used.
Scale ticks Specifies the interval between the displayed scale ticks.
Minimum value Minimum signal value.
Maximum value Maximum signal value.
Border style Specify whether you want the object to appear with a border.
Engineering units Is used for scaling the register value.
scaling
See section "General parameters" on page 114.
Needle Define a color for the pointer needle in the object.
Scale Define a color for the scale in the object.
BG Define a background color for the object.
136 System Manual – DOP11A Operator Terminals