Operator Terminal System Manual - 11276916.pdf

Printing text
blocks
Printing graphic
blocks
System Manual – DOP11A Operator Terminals
Unit Functions
Printing reports
Reports are created as text block with static and dynamic text. The maximum width of
the report is 150 characters. You can enter any text in the text block, for example the
table header or another static text, that is always to be printed. To output process values,
dynamic objects have to be defined that represent the value for the signal with which the
object is linked.
The time when the report is to be printed can be defined, for example, via time channels.
The printing of text blocks is not possible with Unicode.
With DOP11A-20, DOP11A-30, DOP11A-40 and DOP11A-50, graphic blocks can be
output on a printer that is compatible with Epson FX-80.
Graphic blocks can only be printed when they are displayed on the screen. Only black
and white graphic display is supported.
Entering the command "NHD" in the command line under [Setup] / [System signals] has
the laser printer print the graphic block without block header (contains the normal block
name, block number, date and time).
Epson FX-80 graphic does not support grayscale.
The printer buffer must have a size of at least 5 MB to print graphic blocks.
The alarm block, i.e. the graphic block with the alarm list, is printed in text form.
Pressing the key on the terminal when a graphic block is being printed cancels
printing.
I
0
8
199