Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Graphic display and control
0
Digital fill Object that is used for filling a selected area with any color.
[General] tab
54663AEN
The filling of very irregular areas may lead to system errors during operation. In certain
cases, the filling process will slow down the loading time of images.
Parameters Description
Digital signal Signal of the digital address.
Sample Specify whether you want the closed area to be filled throughout or dot-wise
when the signal is output. Applicable for DOP11A-30 and DOP11A-60 only.
On Define the object color for signal value 1.
Off Define the object color for signal value 0.
Other tabs
The functions on the [Access] and [Dynamics] tab are explained in the section "General
parameters" on page 114.
Object positioning
The program calculates which area will be filled. The object must therefore be positioned
correctly. Incorrectly positioned objects may cause application errors during operation.
The area to be filled is only limited by static objects and static parts of dynamic objects.
Filled objects can be replaced by digital symbol objects or multiple symbol objects to
achieve a higher efficiency in a project.
130 System Manual – DOP11A Operator Terminals