Operator Terminal System Manual - 11276916.pdf
Operator Terminal System Manual - 11276916.pdf
Operator Terminal System Manual - 11276916.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HMI-Builder installation<br />
Programming<br />
software<br />
<strong>System</strong><br />
requirements<br />
Installation of HMI-<br />
Builder<br />
<strong>System</strong> <strong>Manual</strong> – DOP11A <strong>Operator</strong> <strong>Terminal</strong>s<br />
Programming<br />
Creating a project<br />
Format type Area<br />
Array 16-bit Table format which can be used for an event in the dynamic function for<br />
graphic objects in DOP11A-20 to DOP11A-50.<br />
Example:<br />
A group of registers is to be allocated different values when the value<br />
entered is equal to 99. The first value in the field Value will then be entered<br />
to register D21 in the field Signal. If the field Value appears as follows<br />
the value 2 will be entered in the next subsequent register<br />
(D22), etc.<br />
The HMI-Builder is a programming software used to develop projects for operator<br />
terminals of the DOP11A series. The functions in the HMI-Builder depend on the<br />
selected terminal.<br />
We recommend using a mouse as the input device for the programming software. Refer<br />
to the Windows Users Guide for information on key combinations.<br />
A project is created with graphic blocks and text blocks in the programming software,<br />
which are then transferred to the operator terminal.<br />
Help texts are available for all functions. The help text for the current function is obtained<br />
by pressing the key. Information on the function is shown by pressing the help<br />
button in the toolbox and then clicking on a function.<br />
HMI-Builder needs a PC with at least 55 MB of available memory and the Microsoft<br />
Windows 95 / 98 / NT / 2000 / XP operating system. The programming software can be<br />
used on either a color or monochrome screen.<br />
The programming software is supplied on a CD. When you place the CD in your CD<br />
ROM drive the installation will start automatically. If not, select [Run] from the start menu<br />
and enter the command D:/setup.exe (if D is the CD ROM drive). Install the programming<br />
software by clicking on the name and following the instructions.<br />
The installation wizard creates an icon for the programming software in the program<br />
group of the programming software. To start the programming software, click on [Start]<br />
and select [Programs] / [Drive <strong>Operator</strong> Panels DOP] / [HMI-Builder]. The manual can<br />
be read directly from the CD by clicking on [<strong>Manual</strong>s].<br />
I<br />
0<br />
7<br />
57
Change language