Operator Terminal System Manual - 11276916.pdf

Network Functions and Communication
9 Network functions in the terminal
Display format for get_device.fn
Name Length Description Example
None None Indicates the value in signed 16-bit format.
+ None Indicates the value in unsigned 16-bit format.
L None Indicates the value in signed 32-bit format.
L+ None Indicates the value in unsigned 32-bit format.
RB None Indicates the value as 32-bit BCD float (SIMATIC).
RF None Indicates the value as 32-bit IEEE float.
RD None Indicates the value as 32-bit IEEE float without exponent.
SB None Indicates the value in 16-bit BCD format.
LB None Indicates the value in 32-bit BCD format.
SH None Indicates the value in 16-bit HEX format.
LH None Indicates the value in 32-bit HEX format.
AR None Indicates the number of values in signed 16-bit format.
ST None Indicates the number of registers as character string.
Automatic refresh The HTML page is usually not automatically refreshed. Adding the following code to the
HTML page will enable automatic refresh.
CONTENT specifies how often the page should be refreshed (in seconds).
Example of an HTML page with SSI script
One IO:
D5 =
M7=
D9 (string) =
D0-D9 =
D8013 =
246 System Manual – DOP11A Operator Terminals