Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Programming with the programming software
0
Figure 50: Display [I/O cross section]
10425AEN
You can select a row in the list and copy it to the clipboard from where you can paste it,
for example, into a Microsoft Word document.
Other managers HMI-Builder also provides managers for managing
Function keys
LEDs
Alarms
Alarm groups
Passwords
Time channels
Message library
Macros
Data exchange
They are opened via the [Functions] menu. The parameters in the respective manager
are described in the corresponding sections.
The definitions for function keys, LEDs, alarms, alarm groups, time channels, message
library, macros and data exchange are listed in the relevant manager. Insert new
definitions using the [Append] or [Insert] functions.
To change a definition, select the definition you want to change, make the change and
click [Update]. To easily change several definitions, click [Update] or [Append] only once
and then confirm each change with the Enter key.
The [Append] and [Update] functions remain active until another function is called. Use
the [Delete] function to delete a selected definition. To close the manager, click [Close].
The following example applies to the alarm manager.
96 System Manual – DOP11A Operator Terminals