Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Programming
Graphic display and control
Touch key Only applies to DOP11A-30 and DOP11A-50. See section "Using touchscreen" on page
151 and chapter 8.10 "Function keys".
This object creates a touch-sensitive surface that corresponds to a function key. The
object can be used to change the display, control memory cells, etc.
[General] tab
10653AEN
Parameter Description
I/O Signal type influenced by the object. For a description of predefined functions, refer
to chapter 8.10 "Function keys".
Event Indicates how the signal is influenced by the object.
The signal is activated via the Settings option when the object is triggered.
Jump to
block
Other
function
Grouped All signals belonging to a touch key with current group number are
reset.
The group number is specified under Group no.
A group comprises a maximum of eight touch keys.
Dec. Analog In this field, the analog signal linked to the function key is
decreased by the value entered under value.
Momentarily Here, the signal is activated as long as the touch key is being
pressed.
Reset Here, the signal is reset when the touch key is being pressed.
Set analog In this field, the analog signal linked to the function key is assigned
the value defined under value.
Toggle The signal is activated and reset in turns when the touch key is
being triggered.
Inc. Analog In this field, the analog signal linked to the function key is
increased by the value defined under value.
Jumps to another block when the touch key is pressed. Enter number of name of the
block to which you want to make the jump.
For a description of the function, refer to chapter 8.10 "Function keys".
Macro Refer to chapter 8.12 "Macros" for a description of this function.
Button style Select the required button style: circular, rectangular or invisible.
BG Define a background color for the object.
I
0
7
149